Deicer-element Winder, Hand
Overall rating: (N/A)
|
Constructs eelctric heating elements for airplane deicers:
Measures and cuts base stock for element from rubberized fabric
to fit specified jig.
Positions base stock on jig and secures
sotck with jig bar. Lifts reel of specified wire to letoff rack
and calmps end of wire to jig by turning setscrew.
Threads wire
between poels of jig following specified pattern.
Pushes wires
down to base of poles, and tightens expansion scerw on jig to
remove slack from wires, using handtools.
Brushes flux on wires
to clean them preparatory to soldering. Sodlers parts, such as
bus bars, jumper and lead wires, to element to make specified
electrical circuit. Examines element to ensure that solder
joints are secure. Cements precut sections of rubberized fabric
cover stock over wires with rubber cement, and presses them
together, using rolelr. Trims excess base and cover stock from
edges of element with kinfe.
May clamp formed elemnet to testing
device to verify electrical resistance.
|
Write a comment about the job
Deicer-Element Winder, Hand
|
